What Makes a Knife a Knife?

As you (the reader of this blog) may be aware, I have been following The Suburban Bushwacker for some time now and recently made him a knife to review. Well this isn't a link to the review (that's to come later) but I'd like to share this informative article he's written on buying the right knife.


If you have a general love of the outdoors, and/or bushcraft I'd also recommend having a look through his other posts. In fact, have a read even if you're not into bushcraft and spent your days in a darkened room surfing the net.. it might help.

Photo Credit: Todd Hill - Primitive Point

The Bushwacker - No Longer Just a Concept

It feels like a very long time ago that I emailed SBW asking if he wanted to review a knife. We had a great deal of emails go back and forth, nutting out the details of the design and materials to use, and most of the time having a good chat too.
This was a huge learning curve for me. Firstly, I had to make something to somebody's specifications - everything I've made so far has been my design and I've been able to allow the blades to evolve as I either make mistakes or change my mind. So this time around, every time I did something wrong my shed would be filled with colourful language as I tossed aside something I'd broken, bent, burned, gouged, melted, chipped, or just generally been unsatisfied with, and then started making it again.

This was the first knife I've made out of a file, and I quickly found that annealing it with a blowtorch just isn't enough. This required annealing several times before I could get it to a workable hardness (or softness).

G-10 is an incredibly unforgiving material. Try shaping it with anything other than a brand new belt and it turns black and starts smoking before your very eyes. I used an entire block of material before I managed to figure out the right pressure when grinding.

The welded buttcap was the last straw - even with the welder on it's lowest setting, I managed to melt part of the tang into a small V indent (which is still there) and simply couldn't fix without risking more damage. This was after the first welding attempt saw the buttcap fall off after it was welded on, shaped, and sanded back to a smooth finish. I actually consider myself to be a fairly passable welder, but arc welding something so small is pretty tricky stuff.

Still, it's all experience and I can finally say that the knife is finished. I just hope SBW finds it to his liking.

Knife for The Suburban Bushwacker

I've been following SBW's blog for some time now and recently asked him if he'd be kind enough to review one of my knives. As a thankyou for taking the time to post a review I've offered to make a knife to SBW's specifications and he's kindly accepted.

After a few emails back and forth regarding the design we settled on making a full tang scandi styled knife, loosely based on Rod Garcia's Skookum Bushtool, though with a deep finger choil and orange G-10 handle.

The initial sketch I sent through to SBW (above) shows the handle with two tubes holding the scales to the tang, and pins arranged in the shape of the Southern Cross (A constellation seen in the Australian skies). The buttcap is to be welded on to the tang.
The design has changed slightly in that the index finger choil will be deeper and (given that I'm making this out of a file) the file markings near the spine of the blade will be ground back to avoid having a rust trap.

I've done the initial grind on the file and now have a blank (once I've removed the rasps) ready for profiling.



More to come later.